In this article, we will try to solve all your doubts and answer all your questions about the Kmode Exception Not Handled error. Read on to find out all about it.
What Do You Mean By “KMODE_EXCEPTION_NOT_HANDLED” Error?
This error comes up when the Operating System experiences a fatal blow and is halted forcefully. It can be a result of various causes and there are some solutions to this issue too. This error is a Blue Screen of Death error which has some possible fixes and it mostly occurs on Windows 11. While this error occurs, sometimes the system crashes and shuts down, other times it just restarts itself. In some other cases, you can experience that you cannot access the Windows Operating System, and in these cases, the problem can only be resolved if the user can access Safe Mode.
What Are The General Causes Of This Error In The Restart Loop Of Windows 10?
This error is basically a Blue Screen Loop error or Blue Screen of Death error on Windows which can prove to be a major issue as it restricts access to the system. It can be a result of outdated drivers which need you to update them. This error is quite identical to System Thread Exception not handled ntfs.sys issue which might require you to install and work with older drivers when necessary. Or, it might result from incorrect BIOS configuration which will require you to reset the current settings to default. Some of the common causes are listed below.
The error indicates which file or software or application is causing the problem. This helps you find the file, locate it and replace, rectify or remove it. The increase in the voltage of the CPU can also cause this error. Faulty or problematic RAM can also cause this kind of error. A faulty driver or bad USB drive can be the reason for this error. An incompatible or corrupt driver can also cause this error. The old or incompatible graphics card can also be the reason for this exception error. This error mostly occurs in most Acer and Dell laptops.
Methods To Fix The Kernel Exception Not Handled Error On Windows 11 and Windows 10.
There are as many as nine easy methods to fix the Kernel Exception Not Handled that you can try before you need to go to a professional for extra assistance. In the next section, we have broken them down one by one to make things easier for you.
Method 1: Installation Of The Missing Drivers.
You need to note that you can try this only if you have access to the Windows operating system. Or else, you can directly skip to the third step. Some of the drivers might be missing from your system which might cause this error. Therefore, following the steps explained below, you can install the drivers that are missing from your system.
Method 2: Renaming The Files With Issues.
Some of the BSoD errors which are the major outcome of this error are resolved just by renaming a particular file. This is not the ideal solution but it is the easiest one and hence worth a try. You can opt for this solution in the following ways.
Method 3: Uninstalling The On/Off Gigabytes.
The program of on/off Gigabyte was designed to deal with USB stations but that driver is incompatible or outdated for Windows 11. So, if you notice any such program in your system, make sure that you remove it. To do so, you can follow the steps given below.
Method 4: Uninstalling The Antivirus Software.
There are times when the error occurs due to the current antivirus software that is installed in your system. So, the simple solution is that you remove or uninstall the antivirus software and see if the problem persists. Follow the steps given below for this step.
Method 5: Updating The BIOS.
The outdated or incompatible BIOS version can also be responsible for the Kmode_Exception_not_handled error. The UEFI or the BIOS might be different on different devices, therefore, it is advisable to check the personalised user manual before updating any BIOS. However, we have listed the most common way to update the BIOS.
Method 6: Setting The CPU Voltage Manually.
Some of the users also report that the Blue Screen errors can be a result of problems with the CPU. Moreover, it can also be solved if you change or adjust the voltage of the CPU manually. It is quite easy and the process requires you to go to the Advanced Settings of the BIOS and change the CPU voltage. For easy processing and better results, consult an expert or look through the user manual of your system.
Method 7: Checking Your RAM.
Sometimes the BSoD errors are a result of faulty RAM. To be sure of this, you need to check the problem in the following ways.
Method 8: Replacing Your RAM.
You can also consider replacing your RAM if the problem persists even after conducting the step mentioned above. For this, you can follow the steps given below.
Method 9: Uninstalling The VPN Client.
Finally, the error can be a result of problems caused by the VPN clients such as Cisco or BitDefender. The solution to this problem is to uninstall them and see if the problem persists. To uninstall the VPN client, you can follow the steps given below.
Go to Settings after clicking on the Start menu. Go to the Apps section. Look for the VPN app, select it and press the Uninstall button. After the uninstall process, reboot the system.
Final Word
We have tried to solve all your doubts and answer all your questions regarding the We have tried solving all your doubts and answering all your questions regarding the Kmode Exception Not Handled error. If you still have doubts or suggestions regarding the topic or the article, you can write to us in the comments section below. Comment * Name * Email * Website
Δ
